- 您现在的位置：买卖IC网 > Sheet目录323 > EDB9315A-Z (Cirrus Logic Inc)KIT DEVELOPMENT EP9315 ARM9
EDB9315A
Technical Reference Manual
3. Getting Started
3.1 Before you Begin...
The developer will find it useful to have some additional hardware not provided in the EDB9315A kit.
Items such as a USB mouse, USB keyboard, VGA monitor and cable, and a set of powered speakers
can make using the EDB9315A and the software installed on the board more enjoyable.
Caution: Make sure you are in a static-free environment and are following proper
procedures for handling ESD-sensitive electronic equipment.
3.2 Attaching Cables
Before attaching cables to the board make sure you know where pin 1 for each of the connectors is
located. Most connectors are keyed. However, some connectors use 2 x n headers, allowing the cable to
be plugged in backwards. Prime examples of this are the Touch Screen and JTAG connectors.
There is silkscreen on the PCB identifying each connector and its pin 1 location. Make sure to pay
attention to the markings on the PCB for the pin 1 location. The pin 1 identifier is marked by either a
number or a triangle.
3.3 Before Applying Power...
In order to use the EDB9315A the user must first connect the peripherals to the EDB9315A as described
in the following procedure.
1.
Place the EDB9315A on a static free surface.
2. Make sure power switch S1 is in the OFF position.
3. Connect the 12V power supply provided to the board at J10.
4. Connect null modem serial cable provided in the kit from DB9 connector J2 to a serial port on a PC
or notebook (if so equipped).
5. Connect a VGA monitor to DB15 connector J6.
6. Launch a terminal program, such as minicom or HyperTerminal. Configure the PC com port for:
38400 baud, 8 data bits, no parity, 1 stop bit, no flow control for WinCE and 57600 baud for Linux.
7. Connect the board to a network that has internet access (optional)
8. Connect a USB mouse and keyboard.
9. Turn power switch S1 to the ON position and the board will boot and shortly display the WinCE 5.0 or
8
? Copyright 2006 Cirrus Logic, Inc.
DS638DB3
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
EDK2378
DEV EVAL KIT FOR H8S/2378
EFM32G-DK3550
KIT DEVELOPMENT EFM32 GECKO
EFM32GG-STK3700
KIT STARTER GIANT GECKO
EFM32LG-DK3650
KIT DEV EFM32 LEOPARD GECKO
EK-K7-KC705-CES-G-J
KINTEX-7 FPGA KC705 EVAL KIT
EK-S6-SP601-G
KIT EVAL SPARTAN 6 SP601
EK-S6-SP605-G
KIT EVAL SPARTAN 6 SP605
EK-V6-ML631-G-J
VIRTEX-6 HXT FPGA ML631 EVAL KIT
相关代理商/技术参数
EDB9407AZ
制造商:Cirrus Logic 功能描述:EVAL BOARD - Bulk
EDB-BLE
功能描述:蓝牙/802.15.1 开发工具 BLUETOOTH LOW ENERGY MSP430 BOOSTER PACK
RoHS:否 制造商:Panasonic Electronic Components 产品:Bluetooth Evaluation Kit 工具用于评估:PAN1721 频率:2.4 GHz 接口类型:I2C 工作电源电压:2 V to 3.6 V
EDBOX101
制造商:E-DEVICE 功能描述:V32BIS IP-MODEM SERIALBOX
EDBOX102
制造商:E-DEVICE 功能描述:V34 IP-MODEM SERIALBOX 制造商:E-DEVICE 功能描述:SMARTSTACK BOX, FOR PSTN, V.34
EDBOX103
制造商:E-DEVICE 功能描述:V90 IP-MODEM SERIALBOX
EDBOX200
制造商:E-DEVICE 功能描述:EMBEDDED ETHERNET SERIALBOX
EDBS03TTE16V
制造商:KOA 制造商全称:KOA Speer Electronics, Inc. 功能描述:bidirectional esd suppressor
EDBS03TTE5V0
制造商:KOA 制造商全称:KOA Speer Electronics, Inc. 功能描述:bidirectional esd suppressor